Best grip tape, wraps and coatings for tool handles
Dip it, wrap it or shrink it. Three ways to put a new grip on a hammer, wrench, shovel or anything else with a handle.
Bare steel and worn wood are slippery and cold. You can add a grip to almost any handle with a liquid dip, a self-bonding tape or a heat-shrink sleeve. Sports tapes work well too, and are the cushiest option.
Quick picks
| Pick | Grip | Why |
|---|---|---|
| Wrap | Rescue Tape Self-Fusing Silicone Tape | Bonds to itself, no adhesive residue. |
| Dip | Plasti Dip Multi-Purpose Rubber Coating | A molded-on rubber coat. |
| Cushion | Lizard Skins DSP Bat Grip | Polymer sports tape for vibration. |
How to choose
Dip, tape or shrink
Dips coat odd shapes like plier handles. Self-fusing tape wraps anything and comes off cleanly. Heat-shrink gives the neatest, toughest finish on straight handles.
Cushion or just traction
Thin coatings add friction. If you want to reduce vibration from a hammer or a mower, use thick polymer tape or foam.
Electrical work
None of these makes a tool safe for live electrical work. Insulated tools are tested and rated for that purpose.
The grips
Rescue Tape
Self-Fusing Silicone Tape
Best for a quick, clean grip on any handle
- Type
- Self-fusing tape
- Material
- Silicone
- Texture
- Smooth
- Traction
- Medium
- Adds
- Thin, stretchy layer
- Install
- Stretch and wrap over itself
- Price tier
- Budget
Silicone tape with no adhesive. Stretched and wrapped, it fuses to itself into a solid rubbery sleeve that resists heat, water and oil. Cut it off and nothing is left behind.
Trade-off. It will not stick if the layers are dirty, and it cannot be repositioned once fused.
Plasti Dip
Multi-Purpose Rubber Coating
Best for pliers, wrenches and odd shapes
- Type
- Liquid dip coating
- Material
- Air-dry synthetic rubber
- Texture
- Smooth
- Traction
- Medium
- Adds
- Builds with each coat
- Install
- Dip, hang and dry, repeat
- Price tier
- Budget
A liquid rubber that dries into a flexible coating. Two or three dips build a durable grip, and it peels off most smooth surfaces if you change your mind.
Trade-off. Strong solvent smell and a long drying time between coats.
Temflex Friction Tape
Best for a traditional tacky wrap
- Type
- Cloth friction tape
- Material
- Cotton cloth with rubber adhesive
- Texture
- Spiral wrap
- Traction
- Medium
- Adds
- Thin
- Install
- Wrap with overlap
- Price tier
- Budget
Cotton tape impregnated with rubber adhesive on both sides. It has been used on tool handles, bats and sticks for generations.
Trade-off. Leaves sticky residue and gets dirty.
Various makers
Textured heat-shrink grip tubing
Best for straight handles and a factory look
- Type
- Heat-shrink sleeve
- Material
- Textured polyolefin
- Texture
- Checkered
- Traction
- Medium
- Adds
- Thin, tight sleeve
- Install
- Slide on and shrink with a heat gun
- Price tier
- Budget
Shrink tubing with an embossed non-slip pattern, sold in many diameters.
Trade-off. Must slide over one end of the handle, and needs a heat gun.
DSP Bat Grip
Best for hammers, axes and anything that vibrates
- Type
- Polymer grip tape
- Material
- DuraSoft Polymer
- Texture
- Spiral wrap
- Traction
- Medium
- Adds
- 0.5 to 1.8 mm
- Install
- Adhesive backed, wrap with overlap
- Price tier
- Mid-range
Bat tape works on any straight handle, and the thicker versions add real cushioning.
Trade-off. Soft polymer cuts and tears in rough workshop use.
Questions people ask
What is the best tape for a hammer handle?
Self-fusing silicone tape for durability, or thick polymer sports tape for cushioning.
Can I use tennis overgrip on tools?
Yes. It is cheap, tacky and easy to replace, though it wears quickly.